Description
The Gootwick CP-2015 Desoldering Wire is a professional solder removal braid designed for efficient and precise desoldering during PCB and electronics repair. With a 2.0mm width and 1.5-meter length, it is suitable for removing excess solder from circuit boards, component pads, ICs, and other electronic connections.
The CP-2015 Desolder Wick is designed for controlled solder removal while helping reduce unnecessary heat exposure to sensitive PCB areas. It can be used by placing the braid over the solder joint and applying a heated soldering iron tip to transfer the molten solder into the copper braid.
The Goot Wick CP-2015 is a practical addition to mobile phone repair, PCB rework, electronics servicing, and soldering work. Its compact reel design allows convenient storage and controlled use, making the Gootwick Desoldering Wire suitable for both professional technicians and electronics enthusiasts.
Key Features
- 2.0mm wide desoldering braid
- 1.5-meter length
- High-purity braided copper construction
- Fast solder absorption
- RMA-based flux coating
- Suitable for leaded and lead-free solder
- Helps remove excess solder from PCB pads and components
- Suitable for precision electronics repair
- Useful for mobile phone and motherboard repair
- Compact reel design for convenient handling
Specifications
| Specification | Details |
|---|---|
| Brand | Gootwick / Goot |
| Model | CP-2015 |
| Product Type | Desoldering Wire / Solder Wick |
| Width | 2.0mm |
| Length | 1.5m |
| Material | Braided Copper |
| Flux | RMA Base Flux |
| Application | Solder Removal & PCB Repair |
| Suitable For | Leaded & Lead-Free Solder |
How to Use
- Place the CP-2015 Desoldering Wire over the solder joint.
- Place the heated soldering iron tip on top of the braid.
- Allow the molten solder to transfer into the copper braid.
- Remove the braid once the solder has been absorbed.
- Cut off the used section with suitable nippers before continuing.
